原文网址:http://www.blogjava.net/heting/archive/2010/03/20/315998.html
C++ C#
=====================================
WORD ushort
DWORD uint
UCHAR int/byte 大部分情况都可以使用int代替,而如果需要严格对齐的话则应该用bytebyte
UCHAR* string/IntPtr
unsigned char* [MarshalAs(UnmanagedType.LPArray)]byte[]/?(Intptr)
char* string
LPCTSTR string
LPTSTR [MarshalAs(UnmanagedType.LPTStr)] string
long int
ulong uint
Handle IntPtr
HWND IntPtr
void* IntPtr
int int
int* ref int
*int IntPtr
unsigned int uint
COLORREF uint
API与C#的数据类型对应关系表
API数据类型 类型描述 C#类型 API数据类型 类型描述 C#类型
WORD 16位无符号整数 ushort CHAR 字符 char
LONG 32位无符号整数 int DWORDLONG 64位长整数 long
DWORD 32位无符号整数 uint HDC 设备描述表句柄 int
HANDLE 句柄,32位整数 int HGDIOBJ GDI对象句柄 int
UINT 32位无符号整数 uint HINSTANCE 实例句柄 int
BOOL 32位布尔型整数 bool HWM 窗口句柄 int
LPSTR 指向字符的32位指针 string HPARAM 32位消息参数 int
LPCSTR 指向常字符的32位指针 String LPARAM 32位消息参数 int
BYTE 字节 byte WPARAM 32位消息参数 int
BOOL=System.Int32
BOOLEAN=System.Int32
BYTE=System.UInt16
CHAR=System.Int16
COLORREF=System.UInt32
DWORD=System.UInt32
DWORD32=System.UInt32
DWORD64=System.UInt64
FLOAT=System.Float
HACCEL=System.IntPtr
HANDLE=System.IntPtr
HBITMAP=System.IntPtr
HBRUSH=System.IntPtr
HCONV=System.IntPtr
HCONVLIST=System.IntPtr
HCURSOR=System.IntPtr
HDC=System.IntPtr
HDDEDATA=System.IntPtr
HDESK=System.IntPtr
HDROP=System.IntPtr
HDWP=System.IntPtr
HENHMETAFILE=System.IntPtr
HFILE=System.IntPtr
HFONT=System.IntPtr
HGDIOBJ=System.IntPtr
HGLOBAL=System.IntPtr
HHOOK=System.IntPtr
HICON=System.IntPtr
HIMAGELIST=System.IntPtr
HIMC=System.IntPtr
HINSTANCE=System.IntPtr
HKEY=System.IntPtr
HLOCAL=System.IntPtr
HMENU=System.IntPtr
HMETAFILE=System.IntPtr
HMODULE=System.IntPtr
HMONITOR=System.IntPtr
HPALETTE=System.IntPtr
HPEN=System.IntPtr
HRGN=System.IntPtr
HRSRC=System.IntPtr
HSZ=System.IntPtr
HWINSTA=System.IntPtr
HWND=System.IntPtr
INT=System.Int32
INT32=System.Int32
INT64=System.Int64
LONG=System.Int32
LONG32=System.Int32
LONG64=System.Int64
LONGLONG=System.Int64
LPARAM=System.IntPtr
LPBOOL=System.Int16[]
LPBYTE=System.UInt16[]
LPCOLORREF=System.UInt32[]
LPCSTR=System.String
LPCTSTR=System.String
LPCVOID=System.UInt32
LPCWSTR=System.String
LPDWORD=System.UInt32[]
LPHANDLE=System.UInt32
LPINT=System.Int32[]
LPLONG=System.Int32[]
LPSTR=System.String
LPTSTR=System.String
LPVOID=System.UInt32
LPWORD=System.Int32[]
LPWSTR=System.String
LRESULT=System.IntPtr
PBOOL=System.Int16[]
PBOOLEAN=System.Int16[]
PBYTE=System.UInt16[]
PCHAR=System.Char[]
PCSTR=System.String
PCTSTR=System.String
PCWCH=System.UInt32
PCWSTR=System.UInt32
PDWORD=System.Int32[]
PFLOAT=System.Float[]
PHANDLE=System.UInt32
PHKEY=System.UInt32
PINT=System.Int32[]
PLCID=System.UInt32
PLONG=System.Int32[]
PLUID=System.UInt32
PSHORT=System.Int16[]
PSTR=System.String
PTBYTE=System.Char[]
PTCHAR=System.Char[]
PTSTR=System.String
PUCHAR=System.Char[]
PUINT=System.UInt32[]
PULONG=System.UInt32[]
PUSHORT=System.UInt16[]
PVOID=System.UInt32
PWCHAR=System.Char[]
PWORD=System.Int16[]
PWSTR=System.String
REGSAM=System.UInt32
SC_HANDLE=System.IntPtr
SC_LOCK=System.IntPtr
SHORT=System.Int16
SIZE_T=System.UInt32
SSIZE_=System.UInt32
TBYTE=System.Char
TCHAR=System.Char
UCHAR=System.Byte
UINT=System.UInt32
UINT32=System.UInt32
UINT64=System.UInt64
ULONG=System.UInt32
ULONG32=System.UInt32
ULONG64=System.UInt64
ULONGLONG=System.UInt64
USHORT=System.UInt16
WORD=System.UInt16
WPARAM=System.IntPtr
Wtypes.h 中的非托管类型 非托管C 语言类型 托管类名 说明
HANDLE void* System.IntPtr 32 位
BYTE unsigned char System.Byte 8 位
SHORT short System.Int16 16 位
WORD unsigned short System.UInt16 16 位
INT int System.Int32 32 位
UINT unsigned int System.UInt32 32 位
LONG long System.Int32 32 位
BOOL long System.Int32 32 位
DWORD unsigned long System.UInt32 32 位
ULONG unsigned long System.UInt32 32 位
CHAR char System.Char 用 ANSI 修饰。
LPSTR char* System.String 或 System.StringBuilder 用 ANSI 修饰。
LPCSTR Const char* System.String 或 System.StringBuilder 用 ANSI 修饰。
LPWSTR wchar_t* System.String 或 System.StringBuilder 用 Unicode 修饰。
LPCWSTR Const wchar_t* System.String 或 System.StringBuilder 用 Unicode 修饰。
FLOAT Float System.Single 32 位
DOUBLE Double System.Double 64 位
C/C++中的结构类型数据在C#下的转换
在做项目移植的时候,经常会碰到数据类型的转换,而我这一次碰到的是C/C++中的结构怎样转换到C#。折腾了一个晚上终于有一个完美的方案。
例如我们在C/C++下的结构数据如下:
typedef struct
{
char sLibName[ 256 ];
char sPathToLibrary[ 256 ];
INT32 iEntries;
INT32 iUsed;
UINT16 iSort;
UINT16 iVersion;
BOOLEAN fContainsSubDirectories;
INT32 iReserved;
} LIBHEADER;
我们想把它转成C#下的结构类型如下:
public struct LIBHEADER
{
public char[] sLibName;
public char[] sPathToLibrary;
public Int32 iEntries;
public Int32 iUsed;
public UInt16 iSort;
public UInt16 iVersion;
public Boolean fContainsSubDirectories;
public Int32 iReserved;
}
看上去好像没问题了,呵呵呵,其实这样是不行的,我们得再给C#编译器一些信息,告诉它一些字符数组的大小。然后它们在C#下面长得样子就变成这样:
[StructLayout(LayoutKind.Sequential)]
public struct LIBHEADER
{
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 256)]
public char[] sLibName;
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 256)]
public char[] sPathToLibrary;
public Int32 iEntries;
public Int32 iUsed;
public UInt16 iSort;
public UInt16 iVersion;
public Boolean fContainsSubDirectories;
public Int32 iReserved;
}
然后写一个函数负责转换。
public StructType ConverBytesToStructure<StructType>(byte[] bytesBuffer)
{
// 检查长度。
if (bytesBuffer.Length != Marshal.SizeOf(typeof(StructType)))
{
throw new ArgumentException("bytesBuffer参数和structObject参数字节长度不一致。");
}
IntPtr bufferHandler = Marshal.AllocHGlobal(bytesBuffer.Length);
for (int index = 0; index < bytesBuffer.Length; index++)
{
Marshal.WriteByte(bufferHandler, index, bytesBuffer[index]);
}
StructType structObject = (StructType)Marshal.PtrToStructure(bufferHandler, typeof(StructType));
Marshal.FreeHGlobal(bufferHandler);
return structObject;
}
然后我们的函数用例是这样:
FileStream file = File.OpenRead(@"D:/Jagged Alliance 2 Gold/INSTALL.LOG");
byte[] buffer = new byte[Marshal.SizeOf(typeof(LIBHEADER))];
file.Read(buffer, 0, buffer.Length);
LIBHEADER testValue = CommonTools.ConverBytesToStructure<LIBHEADER>(buffer);
string libName = new string(testValue.sLibName);
string pathToLibrary= new string(testValue.sPathToLibrary);
OK,搞定。
如果想去掉后面两句的char数组的转换哪代码如下
C#中的结构代码
[StructLayout(LayoutKind.Sequential, CharSet=CharSet.Ansi)]
public struct LIBHEADER
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string sLibName;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 256)]
public string sPathToLibrary;
public Int32 iEntries;
public Int32 iUsed;
public UInt16 iSort;
public UInt16 iVersion;
public Boolean fContainsSubDirectories;
public Int32 iReserved;
}
其它代码不用作修改便可使用。
分享到:
相关推荐
C# 与 C++ 数据类型比较及结构体转换 C# 与 C++ 数据类型比较及结构体转换
把c++的结构体、数据类型、函数定义转换成对应的c#表达,很强大。
在写C#TCP通信程序时,发送数据时,只能发送byte数组,处理起来比较麻烦不说,如果是和c++等写的程序通信的话,很多的都是传送结构体,在VC6.0中可以很方便的把一个char[]数组转换为一个结构体,而在C#却不能直接把...
资源代码演示的是c#代码调用c++ DLL 的方式。该演示为原创,绝非搬砖。解决了c# 调用 C++ Dll获取相关信息之如何传递结构体数组引用以及如何处理获取到的结构体数组数据的问题。
C#实现结构体与数组间的转换,包括:同时支持大小端;支持自定义数据类型;支持数组类型结构体成员,带单元测试
C#调用C++封装成DLL的结构体及类库, 使用数据结构类型, 使用动态库调用方式,函数入参为结构体,返回参数为结构体,使用out,ref 传统参数
C#实现与C++程序通信,将字节流转换为结构体。
c++调用C# COM 参数是结构体数组
C#调用C++封装成DLL的结构体及类
c# 调用c++对于字符串与复杂结构体的处理
c#调用C++动态库、执行回调函数,并回传结构体参数数据。vs2017环境编写C#和C++动态库,这个为完整工程例子,可供相关人员学习参考。
C#调用C++生成的DLL,并返回结构体引用或者结构体指针多个值,工程已编译好
在写C#TCP通信程序时,发送数据时,只能发送byte数组,处理起来比较麻烦不说,如果是和VC6.0等写的程序通信的话,很多的都是传送结构体,在VC6.0中可以很方便的把一个char[]数组转换为一个结构体,而在C#却不能直接...
把结构体存储成2进制文件及从2进制文件中读取信息到结构体示例
有如下结构体定义: typedef struct cemsg { uchar dl; uchar mg; uchar data[10]; }CEMSG; typedef struct msg{ uchar id; uchar cmd; uchar byte[4]; }MSG; typedef struct ...
C#调用C++ dll, 包括结构体, 数组, 函数指针, 字符串等等
网络通信中C、C++结构体转C#结构体
c、c++如果在日志中查看某个结构字段信息,只能通过printf逐个格式化,工作量大; 该dll库通知pdb文件分析结构体字段位置,并根据类型格式一个完整字符串,极大降低了开发者工作量。 1、可通过cdump\Release\...
主要介绍了C#调用C++DLL传递结构体数组的终极解决方案的相关资料,需要的朋友可以参考下
C#遍历结构体